Timed Online Auction
Ajax Textiles
Textile Dyeing, Finishing, & Treatment Equipment
FIRST LOT CLOSES: TUESDAY MARCH 28TH - 10:30AM
Day(s)
:
Hour(s)
:
Minute(s)
:
Second(s)
BIDDING OPENS ON:
Tues. March 21st – 10:00AM
PREVIEW DATES:
Fri. March 24th &
Mon. March 27th
9:00AM – 4:00PM
SITE ADDRESS:
170 Commercial Avenue
Ajax, ON Canada L1S 2H5 (MAP)
Auction in conjunction with Hilco Asset Sales (Canada) & RTE Machinery
SANTEX SANTAFRAME DRYING SYSTEM
2001 Santex Stenter model Santaframe 9K/260 Frame (working width 260 cms) for knitted and woven fabrics w/ Pin Chain, Gas Heated, Mahlo Weft Straightener Model RFMC-10A, 9-Drying zones, Low Profile Design, Mahlo Gravimat weight monitoring and control system, 2-Pads units at entrance, & Exit Folder, S/N 5530
DRYERS
- Fab-Con model Whirlwind Belt Dryer for Tubular and Open width fabrics(max width 200 cms) N/G w/ 4-drying sections, 4-pass drying, exit conveyor & folder (1995)
- Fab-Con Suction Drum Dryer (Working width 115 cms) N/G w/ Balloon Pad, 12-Drying Sections, De-Twister, & control panels (1998)
- Fab-Con Suction Drum Dryer (Working width 98 cms) N/G w/ Balloon Pad, 8-Drying Sections, De-Twister, & control panels (1990)
- (5) American Dryer Corp natural gas dryers
- (3) AC Milnor model MLG-122 natural gas dryers (54 kgs cap.)
TEXTILE FINISHING
- Lafer Model KS-A Open Width Compacting line (working width 260 cms) w/ Tension bar at fabric entrance, Operator platform, Pup tenter w/ pin chain, Steam section, KSA 500 Compactor with Texen control panel, Disc Fabric cutter, Tandematic Guide System, & folder, S/N 10K500941
- Lafer Model CMI 100 Shearing Machine (working width 220 cms) w/ Fabric Guiding System, Central Lint Suction, 2-Shearing cylinders, Brushing Rolls, & Texen Control Panel
- Lafer Model GSI 124 Emerizing-Sueding Machine (working width 240 cms) w/ Spreading Rolls with Photocell, 6-Sueding brushing cylinders, Speed variable on each of cylinders, & Central Dust recovery
- (5) Fab-Con Tubular Compactor w/ Two Rubber rolls, 2-Steam Heated Chambers, Spreader & Folder
- (2) Gessner model Lynx 2000 Napper Machines – Open width & Tubular Fabric Able w/ 36-Rolls, Pile and Counter Pile Action, Lint Central Suction, & Folder
- (3) Gessner Napper Machine (working width 260 cms) w/ High Torque, Pile & Counter Pile Action, 36-Rolls, Tandematic Guide System, Lint Central Suction, & Folder
DYE MACHINES & DYE EXTRACTORS
- Sclavos model Venus HT 4 Jet Dye Machine w/ 4-Dye baths, 720 kgs cap., & Then AMEC-E Controller
- 2004 Fongs model Soft Flow Jet Dye Machine w/ 1-Dye Bath, 200 kgs cap.
- Then model Air Flow AFS 900 Jet Dye Machine w/ 4-Dye Baths, 900 kgs cap. & Then AMC-E Controller AMC-E
- Then model AFS Jet Dye Machine w/ 2-Dye baths, 550 kgs cap., & Then AMC-E Controller
- (2) Then model ThenFlow HT 680 Jet Dye Machine w/ 4-Dye tubes, 600 kgs cap.
- (7) Then model ThenFlow FHT 510 Jet Dye Machine w/ 3, 2, & 1-Dye Tubes, from 150 to 450 kgs cap.
- (3) Then Model ThenFlow FHT 340 Jet Dye Machine w/ 2 & 4-Dye Tubes, 300 – 600 kgs cap.
- Then Chemicals and Dye Dispensing 42-Station System c/w Automatic Powder Dyestuff Weighing, Tanks, Piping , Valves & Pumps, and computer control system w/ software
- Braun model 800 NTDPV-4DC Dye-Extractor
- Braun model 800 NTDPV-4DC Dye-Extractor (new seal required)
- Braun Model 200NTDPV-2DC Dye-Extractor
- Centrifugal Extractor – 48″ inside diameter
INSPECTION MACHINES
- La Mecannica inspection and packing station, W/ Light board, Edge guiding system, Cutting unit, Seam detector, Fabric wind up, & Roll Hardness controls
- Hsing Cheng Inspection and Winding Station w/ Light Board, Edge guiding system, Fabric Wind up, & Fabric meter counter
SLITTERS & SEWING MACHINES
- Bianco De-Twister Slitter & Rope Opener (working width 220 cms) w/ Disc cutter for tubular fabrics, Foulard for water extraction, & exit folder
- Corino model Apricorda Slitter De-Twister (working width 220 cms) w/ Disc cutter for tubular fabrics
- Comatex model CX 220 Tubular Sewing & doubling machine w/ Rimoldi sewing machine, Doubling unit, & Edge guiding system
- (32) Merrow Model JM-3DRW, 70D3B-2-NP, M-3, M-1D-2 overlock sewing machines
RACKING & SHELVING
- (43) Sections 60″ x 126″ x 21’H industrial pallet racking w/ steel deck shelf panels & plywood
- (9) Assorted Sets of UniRack Steel shelving from 14′ to 50’L x 110″d x 70″ to 90″h
- Assorted sections of steel dexion shelving, parts shelves, employee lockers, found throughout facility, etc.
SUPPORT EQUIPMENT
- (5) Bianco Fabric Folders (140 – 220 cm max with)
- (2) Fab-Con Balloon Pad DeTwisting System w/ Fabric Spreader, Tension Compensator, & Double Roll Pad
- Sperotto Rimar model R-P/M Tubular Fabric turner w/ 4-meters long sleeve
- Sperotto Rimar model RP high speed fabric turner w/ dust system
- Sperotto Rimar Fabric Turner
- Hydraulic Bale Press – 50 x 36 cap.
- (12) Nozzle Adjustable Speed Moisturizer System (max width 220cms) w/ water recuperation
- Osprey Model 7-5-S Lint Collecting System w/ 2-Drums Diameter 180 cms by 250 cms, & Maren Bale press
- Beca Packing System for Rolls of Fabric (working width 260 cms) w/ power feed conveyor, plastic feeding unit, wrapping station, Electric Sealing for Rolls of Fabric, Exit Conveyor, & Labeling System
- Large Qty. of plastic rolls for packaging system
FORKLIFTS, RACKS, & CARTS
- Hyster J35XM 3-wheel 3,500lbs cap electric forklift w/ 3-stage mast, 181″ lift, side shift, s/n C160H01645R c/w Charger
- (2) Crown 3-wheel 3,500lbs cap electric forklift w/ 3-stage mast, 181″ lift, side shift, c/w chargers
- (4) Electric walk-behind pallet jacks
- (2) Skyjack SJ-3015 electric scissor lift w/ 500lbs cap, 15′ platform height
- (2) Electric walk-behind pallet jacks
- Approx. (230) 56” X 31.5” X 66.5 metal stackable racks
- (100) Black plastic 58” X 33.5” X 33.5” rolling tote bins
- (40) Blue 75” X 46” X 47” rolling plastic tote bins w/ metal frames
- (17) Tech Star blue 73.5” X 38.5” X 40”rolling tote bins
- (93) White 57.5” X 33” X 33” rolling tote bins
- (24) Black plastic 76” X 39.5” X 40” rolling tote bins
- (36) Black steel tubular 69” X 36” X 66” rolling h/d material carts
- (17) Metal Frame 40” X 36” X 39” platform carts
- (10) Assorted Pallet Jacks
SHOP EQUIPMENT & SPARE PARTS
- (2) Atlas Copco Air Compressors (info coming soon)
- (2) Thermogenics HOG500NA 21,667,000 BTU/HR steam boiler, s/n 92208 & 92209
- (2) 200hp motor / pumps
- Skat Blast Dry Blast System
- Water Softening System
- Large Qty of Timken, SKF, RHP, Fafnir, NTN, & NSK Bearings
- Huge Qty of Stainless Steel Fittings, Kitz 3” & 2 ½” Valves, Motors, Steel components, Aluminum Parts,
- Various Machine Replacement Parts, Stainless Steel Tube, Angle Iron, Steel Tube, Plus Much More
- Qty of assorted hand tools, power tools, welder, steel shop tables, toolboxes, ladders, etc.
CHEMICALS, DYES, & RAW MATERIALS
AUCTION HIGHLIGHTS
TERMS & CONDITIONS
EXCLUSIVE MACHINERY MOVERS:
Lalonde Machinery Movers
LOCAL DELIVERY:
Reza: 416-858-2911
* Danbury Global has no affiliation with any of the third-party companies listed above. Danbury Global is not responsible for their conduct, contracts or obligations.
All Invoices must be paid by: Friday March 31st, 4:00PM
Terms of Payment:
Visa & MasterCard: $ 2,500 limit
Certified Cheque / Draft: No limit
Debit / Wire Transfer: No Limit
Interac E-Transfer: No Limit
* Certified Cheques & Drafts made out to Danbury Global Ltd.
All SMALL items must be removed by: Monday April 3rd, 2023 – 4pm
All LARGE items must be removed by: Friday April 28th, 2023 – 4pm
Checkout Hours:
Monday – Friday: 8:30 AM – 4:00 PM
Weekends: Closed
(Weekend checkout & checkout beyond hours stated above are at customer expense)
Online Buyer’s Premium: 18%
Currency: USD
Taxes: 13%
*All Sales Subject to buyer’s premium & sales tax
MAP TO SITE
AUCTION SITE
Get In Touch
37 Kodiak Crescent, Unit 7
Toronto, ON, Canada, M3J 3E5
+1 (416) 630-5241 • (800) 263-1469
